The Truxxx 604012 lift kit raises the front of your Ram 1500 4×4 2” and the rear 1.25″. This kit enhances the ride of your SUV as well as increasing the ground clearance and providing room for larger wheel and tires. The Truxxx 604012 kit is unique in that it uses a spacer to preload the spring ( the ride is approx 10% stiffer) and a single top plate above the strut to get the correct amount of free sag or down travel in combination with both front strut mount spacers and rear coil spring spacers. This increase in front preload drastically improves the drivability in both on and off road conditions and improves handling in all weather! This kit is the only kit we recommend to use on the new Eco Diesel or any 2013-17 Ram 1500’s. This kit does not create driveline vibration and ball joint issues that happen when you install a cap style leveling kit in a 2006-2017 Ram 1500.
The Truxxx 604012 is also designed to eliminate the Ram 1500 4×4 driveline vibration most other leveling kits cause on the Dodge Ram 1500’s. Every Truxxx 604012 lift kit is made with USA or Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings. Each kit is welded using the latest US Made welders and triple checked to ensure proper fitment. We powder coat every part to make sure the finish lasts as long as your truck does! Each kit contains two front strut spacers, two front strut plates, two rear spring spacers plus all hardware needed, detailed instructions and complete alignment specs. Recommended installation time is approx 3 hours + alignment and 34” tall tires are commonly used on stock offset style wheels.